Hot Dip Galvanized Arm Kit Part List & Information

Parts List

FIG2

Hot Dip Galvanized Kits:

The HDG Kits includes the following:
Two 90 degree elbows with PVC pipe sleeves
Two HDG Steel extension plates
* Optional Parts: Backing plate for HDG Kit recommended for Steel or Aluminum fixed docks.

HDG Attachment Kit without extension plate.  Recommended use when floating dock is set high from the water line.

HDG Attachment Kit with extension plate. An extension plate is needed when the bottom HDG Kit is less then 12 inches from the water line
FIG1 FIG1B
Recommended hardware includes: four 1/2 lag screws and four 1/2 washers that are Hot Dipped Galvanized Recommended hardware includes: four 1/2 lag screws and eight 1/2 washers.  Also include 4 carriage bolts  with lock nuts.  All hardware needs to be Hot Dipped Galvanized

(Xanax)